7850 | DELLORTO DHLA CARBURETTOR IDLE JET HOLDER / EMULSION TUBE

Description

Dellorto DHLA Carburettor idle jet holder & Emulsion Tube.

This is a calibrated part.

Idle jet holders in order of mixture strength:

Weak 5-10-9-4-1-3-6-7-2-8 Rich

Only suitable for pre-emission / non emission DHLA carburettor variations.

Some guidance as to which are the non-emission DHLA carburettor variations, is mentioned here:

• DHLA40 – no letter*
• DHLA40 C
• DHLA40 E
• DHLA40 H turbo
• DHLA45 – all types
• DHLA48 – all types

For all other variations, use idle jet holder 10738 in our shop.

The figures in the below refer to the quantity and size of the air holes in the respective jet holder.

• 7850.1       4 x 1.25        1 x 1.40
• 7850.2       4 x 1.25        1 x 1.20
• 7850.3       4 x 1.30        1 x 1.40
• 7850.4       4 x 1.30        1 x 1.60
• 7850.5       4 x 1.25        2 x 1.40
• 7850.6       4 x 1.30        1 x 1.30
• 7850.7       4 x 1.30        6 x 0.55
• 7850.8       4 x 1.40        4 x 0.50
• 7850.9       4 x 1.30        6 x 0.75
• 7850.10     4 x 1.30        6 x 0.80

Available idle jet holder sizes to choose from are as following:

7850.1  | 7850.2 | 7850.3  | 7850.4  | 7850.5  | 7850.6  | 7850.7  | 7850.8  | 7850.9  | 7850.10

Please select your desired type from the drop-down menu.

* If yours has a letter such as ‘F’, ‘G’ , ‘H’ after the ‘DHLA40’ marking on top of the left-hand barrel, there is a good chance you have an emission / restricted version of the DHLA carburettor, in which case this emulsion tube is not suitable for your carburettor. Use 10738 idle jet holder instead.