EFI Fuel pump & Swirl-pot assembly kit
Part number WFP600
Designed and manufactured by Webcon in the UK
When converting an engine to electronic fuel injection you have to consider adding a swirl-pot to prevent fuel starvation and a high-pressure fuel pump to meet the requirements of the new system.
This assembly/kit is suitable for integration with Weber Alpha EFI systems and all other popular makes of EFI systems.
The swirl pot is hand made from lightweight alloy and comes with a blank mounting base that can be drilled to suit.
The high pressure fuel pump is a perfect fit inside the swirl-pot to keep overall dimensions to a minimum.
75L/H and 8.5A max at 12v @ 350kpa
For full pump specification sheet, see attached PDF or email us and we will email it as an attachment.
Low pressure fuel from the original fuel tank is fed into the lower side inlet.
Excess fuel is fed back to the fuel tank via the upper, restricted outlet.
The high pressure feed outlet to the fuel rail and return from the pressure regulator are neatly contained on the top of the unit along with the electrical Connection.
WFP600 is especially useful when converting a classic car to EFI as there tends to be little room available to fit a seperate fuel pump and swirl pot.
This kit comes complete with a length of connecting fuel hose that can be cut as required.
Also, ready-to-wire electrical connectors are included.
WFP600 is 235mm high x140mm diameter
Shipping Worldwide OK