Description

This is a bypass/converter fuel pressure regulator for carburetted engines, both aspirated and turbo.

You
can fit any kind of pump, both low pressure and high pressure for
injection . At output you always have a very
stable pressure to carburetter/s, with high flow. With turbo
applications on carburetters, sending the boost to 5 mm connector on the
lid fuel pressure rises with 1:1 rate.

This is a genuine Malpassi regulator and is manufactured with a
special alloy casting, each piece is assembled by hand and tested to
assure maximum performance

Please see Related products tab for Pressure gauge and fuel line adaptor
For applications on aspirated a/o turbocharged carburetted engines Compatible with alcoholed fuel (E85) Composite special diaphragm 1 x INLET port,1/8″ NPT 1 x OUTLETport,1/8″ NPT 1 x RETURN port,1/8″ NPT 1 x boost connector, 5 mm tail (only for turbo applications)
Pressure setting range from 1.5psi to about 5psi (plus boost if turbocharged)
Supplied with 3 x1/8″ NPT connectors (8 mm tail)

30044BYPASRE