Weber Carburettor Manual Choke Conversion Kit

Description

WEBER CARBURETTOR MANUAL CHOKE CONVERSION KIT

Convert a compatible Weber automatic choke carburettor to a straightforward, driver-operated pull-cable choke with this manual choke conversion kit.

Designed for classic-car owners who prefer direct control over cold-start enrichment, this compact conversion replaces the original automatic choke housing components with a manual open-and-close mechanism. Once fitted, the choke can be operated using a suitable Weber choke cable, giving you manual control when starting from cold.

The kit fits in place of the existing choke housing cover and thermostat spring/coil assembly. Reuse the standard retaining ring and three mounting screws to secure the mechanism to the carburetor.

This Weber manual choke conversion is ideal where the original automatic choke unit is no longer required, has been removed, or where a manual cable-operated setup is preferred.

Please note: the carburettor pictured is for illustration only and is not included.

Key Features

• Converts compatible Weber automatic choke carburetors to manual choke operation
• Allows use of a pull-type choke cable for direct manual control
• Replaces the original choke housing cover and thermostat spring/coil arrangement
• Uses the original retaining ring and three screws for mounting
• Compact, practical conversion for a range of Weber carburettor models
• Suitable for classic cars, kit cars and modified vehicles using compatible Weber carburettors
• Worldwide shipping available

Compatible Weber Carburettors

This manual choke conversion kit is designed for the following Weber carburetor types:

• Weber 32 and 32/36 DGAV
• Weber 32 and 32/36 DGEV
• Weber 38 DGAS
• Weber 38 DGES
• Weber 40 DFAV
• Weber 34 DAT
• Weber 34 DATR
• Weber 32 DAR
• Weber 32 DARA
• Weber 34 ADF
• Weber 36 DCA

Always compare your carburettor and choke housing arrangement with the product images before ordering. Note: See last photo for unit dimension measurements

Installation Information

To fit the manual choke conversion kit:

1. Remove the existing automatic choke housing cover.
2. Remove the thermostat spring or coil from the choke assembly.
3. Position the manual choke conversion mechanism in its place.
4. Refit the original retaining ring and secure it using the three standard screws.
5. Connect a compatible Weber choke cable to operate the mechanism.

The mechanism does not include a return spring. In most installations, positive operation through the choke cable is sufficient; alternatively, an external return spring can be fitted if required.

Related Products

For a cable-operated setup, pair this conversion mechanism with a suitable weber choke cables.

If you need a complete manual choke conversion kit rather than the conversion mechanism alone, please search for Part No. 4505200000 in the Classic Carbs shop.

FAQ’s

Does this kit fit a Weber 32/36 DGAV carburettor?

Yes. This manual choke conversion kit is designed to fit compatible Weber 32 and 32/36 DGAV carburettors, replacing the automatic choke components with a cable-operated manual choke mechanism.

Will it fit a Weber 38 DGAS?

Yes. The conversion mechanism is designed for compatible Weber 38 DGAS and 38 DGES carburettors.

Is a choke cable included?

This product is the manual choke conversion mechanism. A suitable Weber choke cable can be used to operate it; check the individual product listing for exactly what is supplied.

Does the kit include a return spring?

No. The mechanism does not have a built-in return spring. Positive movement through the choke cable can operate it, or an external spring may be fitted if preferred.

Is the carburettor included?

No. The carburettor shown in the product images is not included.