£4,162.12 ex VAT£4,994.54 inc VAT
ROVER V8 ENGINE WEBER 44 IDF CARBURETTOR CONVERSION KIT (Complete)
WEBER 4 x 44IDF performance kit for Rover V8 3.5 / 3.9 engines.
Kit includes intake manifold, nuts, gaskets & bolts, carburettors & throttle linkage.
Revised manifold design and re-positioned x4 Weber 44 IDF carburettors in a line along the manifold between the cylinder heads, much like the early Aston Martin V8, creating an overall lower profile installation.
The height of the assembly from the top of the intake port to the top flange of the carburettors is 150mm. The stock air horns are 63mm giving an overall height of 206mm. This can be reduced by 40mm by using 16mm air horns and low profile emulsion tube holders
Here are suitable Mesh Air Filters
The WEBER 44 IDF carburettors in the kit are supplied with the following “starting point” calibration which will allow the engine to start and run.
Venturi 36mm
Auxiliary venturi 4.5
Main jet 135
Air corrector 175
Emulsion tube F11
Idle jet 50
Pump jet 50
To achieve maximum power, driveability and efficiency, we recommend that you have the carburettors calibrated on a rolling road.
Please note that, owing to our policy of continuous improvement, kit contents may be subject to change without prior notice.
Genuine WEBER Carburettors.
Brand New
Shipping Worldwide OK
