£318.93 ex VAT£382.72 inc VAT
Weber 32/36 DGV progressive carburettor.
Genuine Weber, made in Spain.
Manual choke replacement carburettor kit to suit the Crossflow and Pinto 1.6L engined versions of Ford Capri, Cortina, Escort and Granada models manufactured in the late 1970’s and early 1980s.
Manual choke mechanism fitted (Pull cable type).
The carburettor will start & run your engine safely.
Further, refined calibration can be obtained from having your car tuned on a rolling road dynamometer.
Kit contains:
Weber 32/36 DGV carburettor
Choke cable and fitting kit
Water hose by pass kit
Fuel pipe and return to tank adaptor
In line fuel filter
Manifold heat spacer/gasket
Fitting instructions
Standard jetting:
140 Primary Main jets
135 Secondary Main jets
160 Primary Air correctors
165 Secondary Air correctors
50 Primary Idle jet
55 Secondary Idle jet
200 Float valve
50 Pump jet
WEBER 32/36 DGV Carburettor centre-to-centre mounting stud dimensions: 46 x 93mm
Check the mounting stud spacing on your intake manifold to confirm it will accept this WEBER.
Several manifold/carburettor combinations can be found on Pintos and crossflows, and not all of them are interchangeable. If your stud mounting dimensions are approximately 46 x 93mm then you can use this kit to convert your motor : )
Brand New
Shipping Worldwide OK
