Description
Parts on this drawing
Carburettor parts list in below table — click on available parts to view them or order them in the shop.
Original factory settings for this carburettor
Taken from the calibration table on the drawing. The calibration below is what this carburettor left the factory with. Sizes are in millimetres. Check what is actually fitted to yours before ordering.
Tap the table to open it full size.
| Item | Weber no. | Part | Price |
|---|---|---|---|
| 1 | 5286a | Carburettor top cover, complete | not available |
| 2 | 5420 | Stud | not available |
| 3 | 665 | Top cover fixing screw | not available |
| 4 | 236 | Filter housing gasket | not available |
| 5 | F 73 | Filter housing | not available |
| 6 | 2494 | Filter gauze | not available |
| 7 | 235 | Filter housing gasket | not available |
| 8 | 2612 | Filter housing fixing screw | not available |
| 9 | 2436 | Top cover gasket | not available |
| 10 | 1975 | Needle valve gasket | not available |
| 11 | 2879 | Pump rod | not available |
| 12 | 2903 | Spring retaining plate | not available |
| 13 | 1660a | Needle valve, complete (calibrated part, size varies) | not available |
| 14 | 2880 | Pump plunger spring | not available |
| 15 | 1381a | Starter adjuster, complete (calibrated part, size varies) | not available |
| 16 | 2970a | Float, complete | not available |
| 17 | 1829 | Float pivot pin | not available |
| 18 | 2948a | Pump inlet and discharge valve (calibrated part, size varies) | not available |
| 19 | 2877a | Pump plunger, complete | not available |
| 20 | TS 865 | Idle jet (calibrated part, size varies) | not available |
| 21 | TS 864 | Idle jet holder | not available |
| 22 | 2850 | Pump control free lever | not available |
| 23 | 2853 | Special spindle nut | not available |
| 24 | 2848 | Second pump stroke lever | not available |
| 25 | 2545 | Main jet holder | not available |
| 26 | 2546 | Main jet holder gasket | not available |
| 27 | TS 510 | Primary main jet (calibrated part, size varies) | not available |
| 27A | TS 510 | Secondary main jet (calibrated part, size varies) | not available |
| 28 | 2920 | Spindle spacer bush | not available |
| 29 | 2847 | First pump stroke lever | not available |
| 30 | TS 625 | Progression hole inspection screw | not available |
| 31 | 5287 | Throttle adjusting screw | not available |
| 32 | 514 | Nut retaining split pin | not available |
| 33 | — | Carburettor body (not supplied as a spare) | not available |
| 34 | 2911 | Spindle return spring | not available |
| 35 | 767 | Throttle valve fixing screw | not available |
| 36 | 5233 | Primary throttle valve | not available |
| 37 | 2987 | Secondary throttle valve | not available |
| 38 | 2919a | Primary throttle spindle | not available |
| 39 | 3008a | Secondary throttle spindle | not available |
| 40 | 2871 | Primary toothed sector | not available |
| 41 | 2932 | Toothed sector return spring | not available |
| 42 | 4 | Spacer washer | not available |
| 43 | 2939 | Spacer bush | not available |
| 44 | 865 | Lever fixing nut | not available |
| 45 | 2464 | Lock washer | not available |
| 46 | TS1136a | Throttle control lever | not available |
| 47 | 4044 | Toothed sector box cover | not available |
| 48 | 38 | Throttle adjusting screw spring | not available |
| 48A | 38 | Mixture adjusting screw spring | not available |
| 49 | 864 | EARLY WEBER DCF / DCO3 CARBURETTOR IDLE MIXTURE SCREW | £36.00 |
| 50 | 3049a | Cable sheath support cover, complete | not available |
| 51 | 2967 | Cover with cable sheath support | not available |
| 52 | 1584 | Plate fixing screw | not available |
| 53 | 1583 | Cable sheath fixing plate | not available |
| 54 | 2288 | Toothed sector box cover fixing screw | not available |
| 55 | 336 | Cable sheath support cover fixing screw | not available |
| 56 | 3050a | Starter valve control lever, complete | not available |
| 57 | 364 | Screw nut | not available |
| 58 | 2968 | Valve control lever | not available |
| 59 | 375 | Screw bush | not available |
| 60 | 1698 | Cable fixing screw | not available |
| 61 | 2969 | Starter valve lever pin | not available |
| 62 | 1586 | Pin spring clip | not available |
| 63 | 939 | Starter valve spring | not available |
| 64 | 936 | Starter valve | not available |
| 65 | G 70 | Venturi fixing screw | not available |
| 65A | G 70 | Auxiliary venturi fixing screw | not available |
| 66 | 1338 | Starter jet (calibrated part, size varies) | not available |
| 67 | 1339 | Jet gasket | not available |
| 68 | 512 | Starter air jet (calibrated part, size varies) | not available |
| 69 | 1520 | Pump jet gasket | not available |
| 70 | TS 635 | Pump jet (calibrated part, size varies) | not available |
| 71 | TS 534a | Primary emulsion tube (calibrated part, size varies) | not available |
| 71A | TS 534a | Secondary emulsion tube (calibrated part, size varies) | not available |
| 72 | 1311 | Primary air corrector jet (calibrated part, size varies) | not available |
| 72A | 1311 | Secondary air corrector jet (calibrated part, size varies) | not available |
| 73 | TS 991a | Pump delivery valve, complete | not available |
| 74 | 3333 | Primary choke (venturi) (calibrated part, size varies) | not available |
| 74A | TS 502 | Secondary choke (venturi) (calibrated part, size varies) | not available |
| 75 | TS 257 | Primary auxiliary venturi (calibrated part, size varies) | not available |
| 75A | TS 257 | Secondary auxiliary venturi (calibrated part, size varies) | not available |
Hello,
This is a downloadable PDF sheet, relating to the carburettor shown in the title of this product page.
You will receive the link to download the PDF sheet, as soon as you have completed your order.
You will NOT receive anything through the post – THIS IS NOT A PHYSICAL PRODUCT.
You will need a printer, or a storage facility on your computer/mobile device/tablet, to view and store this PDF file.
We need your postal address during order checkout, because this process involves a financial transaction between you and classic carbs UK.
But we will not be posting any physical parts to you (unless you have included additional, physical parts in your order).
The diagram is mostly in English, but some variations might be in Italian or French.
The PDF will typically show you an exploded drawing of your carburettor, name of each individual part, part number of each individual part, and the original jetting and choke venturi calibration.
The download will be instantly available to you, and you can use it to help you rebuild, restore, repair and calibrate your weber carburettor(s).
This is NOT a generic ‘How to repair your weber’ manual, it is a specific spec-sheet diagram, showing you what you have and what parts it is made of.
This is Genuine WEBER factory publication, with Precise technical details, that can be very useful towards successfully bringing your weber carburettor back to life!
Add it to cart, proceed to checkout, add your contact details (incl. address), and select Paypal, debit or credit card, or bank transfer to pay for your order.
If you need any assistance, email us at [email protected]
Thanks,
Emmanuel
Classic Carbs UK
__________________________________________________________________________________________________________________
After purchase, you will be redirected to this page pictured below, where you can download the product.










