Description
Parts on this drawing
Carburettor parts list in below table — click on available parts to view them or order them in the shop.
Service kit for this carburettor: WEBER 32 IMPE CARBURETTOR Service Kit — £65
Original factory settings for this carburettor
Taken from the calibration table on the drawing. The calibration below is what this carburettor left the factory with. Sizes are in millimetres. Check what is actually fitted to yours before ordering.
Tap the table to open it full size.
| Item | Weber no. | Part | Price |
|---|---|---|---|
| 1 | 31706.016 | Carburettor cover | not available |
| 3 | 64700.005 | Carburettor cover fixing screw (now 64695.005) | £3.74 |
| 4 | 61002.010 | WEBER CARBURETTOR FUEL FILTER BRASS COVER | £13.16 |
| 5 | 41530.024 | WEBER CARBURETTOR FUEL FILTER OUTER FIBRE SEAL/WASHER | £1.07 |
| 6 | 37022.002 | WEBER CARBURETTOR INTERNAL FUEL FILTER ELEMENT | £5.03 |
| 7 | 41700.001 | Carburettor cover gasket | not available |
| 8 | 52570.004 | WEBER CARBURETTOR IDLE JET HOLDER | £9.86 |
| 9 | 41160.001 | WEBER CARBURETTOR IDLE JET (now 74401) | £4.96 |
| 10 | 41535.015 | WEBER CARBURETTOR NEEDLE VALVE WASHER (now 83102.070) | £1.02 |
| 11 | 64240.008 | WEBER CARBURETTOR NEEDLE VALVE (now 79507) | £16.16 |
| 12 | 41015.009 | Float | not available |
| 13 | 52000.010 | WEBER DCNF / ICT / ICH CARBURETTOR FLOAT PIN | £2.04 |
| 14 | 32536.007 | Choke control | not available |
| 15 | 45027.017 | Choke control lever, comprising: | not available |
| 16 | 99076.861 | Cable fixing screw | not available |
| 17 | 45025.003 | Choke control lever | not available |
| 18 | 34720.002 | Choke cable Inner lock nut DCOE | £3.63 |
| 19 | 10085.002 | Choke valve control spindle | not available |
| 20 | 37000.015 | Reticella filtrante aria avviamento | not available |
| 21 | — | Cable outer support cover | not available |
| 22 | 64605.017 | WEBER CARBURETTOR CHOKE CABLE CLAMP SCREW | LOCKS THE OUTER CABLE SHEATH | £2.90 |
| 23 | 47610.004 | WEBER CARBURETTOR THROTTLE RETURN SPRING | £4.17 |
| 24 | 34715.010 | WEBER CARBURETTORS TRUMPET STUD NUT (now 99901.165) | £0.37 |
| 25 | 55525.010 | WEBER CARBURETTOR SPRING WASHER | M6 | £0.33 |
| 26 | 64700.006 | Cable outer support cover fixing screw | not available |
| 27 | 64755.006 | Idle adjusting screw | not available |
| 28 | 47600.084 | WEBER CARBURETTOR IDLE MIXTURE SCREW & IDLE SPEED SCREW SPRING | FOR M4 MIXTURE OR IDLE SPEED SCREW | £4.38 |
| 29 | 47600.084 | WEBER CARBURETTOR IDLE MIXTURE SCREW & IDLE SPEED SCREW SPRING | FOR M4 MIXTURE OR IDLE SPEED SCREW | £4.38 |
| 29 | 41540.001 | WEBER IDA3C / DCD / DCZ / IF3C / ICF CARBURETTOR MAIN JET HOLDER WASHER | £1.14 |
| 30 | 41120.001 | WEBER CARBURETTOR MAIN JET (now 73801) | £2.69 |
| 31 | 52590.001 | WEBER CARBURETTOR MAIN JET HOLDER | £12.58 |
| 32 | 64625.004 | Butterfly adjusting screw | not available |
| 33 | — | Spare spare carburettor body | not available |
| 34 | 64955.203 | Flangi stud screw | not available |
| 35 | 64955.203 | Flangia stud screw | not available |
| 36 | 10015.442 | Butterfly valve porta spindle | not available |
| 37 | 10016.424 | Maggiorto butterfly valve porta spindle | not available |
| 38 | 64570.008 | Grub Screw – Idle jet holder for weber ICH | £1.66 |
| 38 | 64005.027 | Throttle plate | not available |
| 39 | 55555.016 | Throttle shaft shim | £1.66 |
| 40 | 34715.014 | WEBER CARBURETTOR SPINDLE / THROTTLE SHAFT NUT | M8x1.0mm | £1.04 |
| 41 | 55520.002 | WEBER CARBURETTOR SPINDLE / THROTTLE SHAFT LOCK TAB WASHER | £0.84 |
| 42 | 45034.018 | Butterfly control lever | not available |
| 43 | 47610.005 | Lever return spring | not available |
| 44 | 64290.001 | Pump discharge e intake valve | not available |
| 45 | 58602.003 | WEBER DCOE, DCO/SP & IMPE CARBURETTOR PUMP PLUNGER | £18.11 |
| 46 | 47600.034 | WEBER DCOE CARBURETTOR ACCELERATOR PUMP SPRING (EARLY TYPE) | £4.17 |
| 47 | 52140.003 | Plunger spring retaining plate | not available |
| 48 | 41530.012 | WEBER CARBURETTOR PUMP JET COPPER WASHER (now 41540.014) | £1.60 |
| 49 | 64290.003 | WEBER CARBURETTOR PUMP JET DEMAND VALVE (now 64290.005) | £18.23 |
| 50 | 41252.005 | Pump jet | not available |
| 51 | 10400.003 | Pump control asta | not available |
| 52 | 34936.001 | Dilfusore | not available |
| 53 | 34936.002 | Venturi | not available |
| 54 | 31866.003 | Mixture auxiliary venturi | not available |
| 54 | 41205.101 | Starting Jet DCOE (now 7560506000) | £10.21 |
| 55 | 41360.001 | WEBER CARBURETTOR AIR CORRECTOR JET (now 77201) | £3.04 |
| 56 | 10140.010 | WEBER CARBURETTOR RETAINING RING STARTER VALVE SEAT | £9.01 |
| 57 | 12775.004 | WEBER DCOE CARBURETTOR STARTER / CHOKE VALVE SPRING GUIDE | £5.79 |
| 58 | 47600.086 | Choke valve spring | not available |
| 59 | 61440.241 | WEBER CARBURETTOR EMULSION TUBE | £17 |
| 60 | 64330.005 | STARTER VALVE IMB 26 / 28 | £21.55 |
| 61 | 10525.014 | Tubetto presa depressione | not available |
Hello,
This is a downloadable PDF sheet, relating to the carburettor shown in the title of this product page.
You will receive the link to download the PDF sheet, as soon as you have completed your order.
You will NOT receive anything through the post – THIS IS NOT A PHYSICAL PRODUCT.
You will need a printer, or a storage facility on your computer/mobile device/tablet, to view and store this PDF file.
We need your postal address during order checkout, because this process involves a financial transaction between you and classic carbs UK.
But we will not be posting any physical parts to you (unless you have included additional, physical parts in your order).
The diagram is mostly in English, but some variations might be in Italian or French.
The PDF will typically show you an exploded drawing of your carburettor, name of each individual part, part number of each individual part, and the original jetting and choke venturi calibration.
The download will be instantly available to you, and you can use it to help you rebuild, restore, repair and calibrate your weber carburettor(s).
This is NOT a generic ‘How to repair your weber’ manual, it is a specific spec-sheet diagram, showing you what you have and what parts it is made of.
This is Genuine WEBER factory publication, with Precise technical details, that can be very useful towards successfully bringing your weber carburettor back to life!
Add it to cart, proceed to checkout, add your contact details (incl. address), and select Paypal, debit or credit card, or bank transfer to pay for your order.
If you need any assistance, email us at [email protected]
Thanks,
Emmanuel
Classic Carbs UK
__________________________________________________________________________________________________________________
After purchase, you will be redirected to this page pictured below, where you can download the product.










