Description
Parts on this drawing
Carburettor parts list in below table — click on available parts to view them or order them in the shop.
Original factory settings for this carburettor
Taken from the calibration table on the drawing. The calibration below is what this carburettor left the factory with. Sizes are in millimetres. Check what is actually fitted to yours before ordering.
Tap the table to open it full size.
| Item | Weber no. | Part | Price |
|---|---|---|---|
| 1 | 31716.050 | Carburettor cover | not available |
| 2 | 64955.010 | Stud | not available |
| 3 | 31716.049 | Carburettor cover | not available |
| 4 | 64955.010 | Stud | not available |
| 3 | 58702.012 | Sostegno bracket | not available |
| 4 | 64700.005 | Carburettor cover fiss screw (now 64695.005) | £3.74 |
| 5 | 64700.001 | WEBER CARBURETTOR TOP COVER SCREW | M5 x 22mm (now 64695.021W) | £2.10 |
| 5 | 47600.052 | Weber DCD Carburettor | Starter Valve / Choke / Cold start Spring | £13.04 |
| 6 | 58600.007 | WEBER DCD / DCZ / DCL Carburettor Pump Rod Plunger | £20.67 |
| 7 | 12775.013 | WEBER DCD, DCS, DCB, DCHD, DCHE CARBURETTOR STARTER VALVE BUSH | £5.79 |
| 8 | 10140.010 | WEBER CARBURETTOR RETAINING RING STARTER VALVE SEAT | £9.01 |
| 9 | 61002.010 | WEBER CARBURETTOR FUEL FILTER BRASS COVER | £13.16 |
| 10 | 41530.024 | WEBER CARBURETTOR FUEL FILTER OUTER FIBRE SEAL/WASHER | £1.07 |
| 11 | 12775.026 | Boccola protezione reticella | not available |
| 12 | 37020.005 | Reticella filtrante | not available |
| 13 | 41705.002 | Carburettor cover gasket | not available |
| 14 | 41535.015 | WEBER CARBURETTOR NEEDLE VALVE WASHER (now 83102.070) | £1.02 |
| 15 | 64240.010 | WEBER CARBURETTOR NEEDLE VALVE (now 79507) | £16.16 |
| 16 | 41030.011 | WEBER CARBURETTOR FLOAT | £56.25 |
| 17 | 52000.001 | WEBER CARBURETTOR FLOAT FULCRUM PIN | £2.04 |
| 18 | 10400.027 | Pump control asta | not available |
| 19 | 52140.002 | Plunger spring retaining plate | not available |
| 20 | 47600.085 | Pump plunger spring | not available |
| 21 | 41370.005 | WEBER CARBURETTOR AIR CORRECTOR JET (now 77501) | £4.15 |
| 22 | 41200.101 | RECONDITIONED WEBER CARBURETTOR COLD STARTER / STARTING JET | £16.95 |
| 23 | 58602.005 | Pump plunger | not available |
| 24 | 64290.001 | Pump discharge e¢ intake valve | not available |
| 25 | 41760.001 | Idle jet | not available |
| 26 | 41555.004 | Sealing ring | not available |
| 27 | 52570.005 | WEBER CARBURETTOR IDLE JET HOLDER | £4.15 |
| 28 | 41540.001 | WEBER IDA3C / DCD / DCZ / IF3C / ICF CARBURETTOR MAIN JET HOLDER WASHER | £1.14 |
| 29 | 41920.001 | Main jet | not available |
| 30 | 52590.001 | WEBER CARBURETTOR MAIN JET HOLDER | £12.58 |
| 31 | 58202.015 | Settore dentato registrabile | not available |
| 32 | 61015.004 | Idle drilling inspection screw | not available |
| 33 | 64005.038 | Throttle plate | not available |
| 34 | 47610.048 | Sinistro spindle return spring | not available |
| 35 | 10015.438 | Alberino sinistro | not available |
| 36 | 10016.425 | Oversize sinistro spindle | not available |
| 36 | 61015.009 | WEBER DCOE / IDA & IDA3C CARBURETTOR PROGRESSION HOLE COVER SCREW | £6.68 |
| 37 | 47610.049 | Loose teva return spring | not available |
| 38 | 45039.018 | Pump control loose lever | not available |
| 39 | 55510.041 | Circlip washer | not available |
| 40 | 10140.401 | Dentellato spring ring | not available |
| 41 | 55510.040 | Circlip washer | not available |
| 42 | 55555.016 | Throttle shaft shim | £1.66 |
| 43 | 34715.014 | WEBER CARBURETTOR SPINDLE / THROTTLE SHAFT NUT | M8x1.0mm | £1.04 |
| 44 | 55520.002 | WEBER CARBURETTOR SPINDLE / THROTTLE SHAFT LOCK TAB WASHER | £0.84 |
| 45 | 55515.013 | Spacer bush | not available |
| 46 | 12750.058 | 45A 11] Boccola distanziale | not available |
| 47 | 14850.013 | Pump control camme | not available |
| 48 | 64570.008 | Grub Screw – Idle jet holder for weber ICH | £1.66 |
| 48 | 10015.439 | Alberino destro | not available |
| 49 | 10016.427 | Oversize destro spindle | not available |
| 50 | 10015.444 | 48A 1] Alberino desiro | not available |
| 51 | 47610.034 | Alberino destro return spring | £7.42 |
| 52 | 32464.003 | Scatola settori cover | not available |
| 53 | 32464.013 | 49A 1 Coperchio scatola settori | not available |
| 50 | 45027.053 | Butterflies com lever | not available |
| 51 | 45027.054 | 50A Leva com. farfalle | not available |
| 51 | 64570.004 | Vite fiss. scatola settori | not available |
| 52 | 47732.001 | Morsetto fiss. settore registrabile | not available |
| 53 | 64605.001 | Morsetto screw | not available |
| 54 | — | Choke control fixing screw | not available |
| 55 | 32536.011 | Choke control | not available |
| 56 | 32536.017 | to (34 DCS 3) | not available |
| 56 | 45096.008 | Link rod com lever | not available |
| 57 | 64800.002 | Weber DCOE Carburettor choke inner cable screw | £5.00 |
| 58 | 34720.002 | Choke cable Inner lock nut DCOE | £3.63 |
| 59 | 45096.006 | 1] —Leva …. 4 | not available |
| 60 | 45096.007 | 59A 1 Leva | not available |
| 60 | 32610.002 | Split pin | not available |
| 61 | — | Rosctta | not available |
| 62 | 32536.010 | Com. avviamento cover | not available |
| 63 | 10085.004 | WEBER DCD CARBURETTOR | COLD START / CHOKE ACTUATING SPINDLE | £22.03 |
| 64 | 61285.008 | 1] —Tirantino ……. . «© | not available |
| 65 | 61285.009 | 64A 1 —Tirantino 3) . « « + | not available |
| 65 | 34715.010 | WEBER CARBURETTORS TRUMPET STUD NUT (now 99901.165) | £0.37 |
| 66 | 55525.010 | WEBER CARBURETTOR SPRING WASHER | M6 | £0.33 |
| 67 | 45027.042 | —tLeva com, avviamento | not available |
| 68 | 45027.057 | 67A 1 Leva com, avviamento | not available |
| 68 | 47610.004 | WEBER CARBURETTOR THROTTLE RETURN SPRING | £4.17 |
| 69 | 64625.002 | WEBER THROTTLE ADJUSTING SCREW | £2.61 |
| 70 | 12785.009 | Screw spacer | not available |
| 71 | 47600.084 | WEBER CARBURETTOR IDLE MIXTURE SCREW & IDLE SPEED SCREW SPRING | FOR M4 MIXTURE OR IDLE SPEED SCREW | £4.38 |
| 72 | 47600.007 | WEBER CARBURETTOR IDLE MIXTURE & THROTTLE STOP SCREW SPRING | £1.51 |
| 73 | 64750.001 | WEBER CARBURETTOR IDLE MIXTURE SCREW (Short Type) | £8.12 |
| 74 | 41530.012 | WEBER CARBURETTOR PUMP JET COPPER WASHER (now 41540.014) | £1.60 |
| 75 | 41252.007 | 76206 | WEBER CARBURETTOR PUMP JET | £17.5 |
| 76 | 64290.003 | WEBER CARBURETTOR PUMP JET DEMAND VALVE (now 64290.005) | £18.23 |
| 77 | 41370.002 | WEBER CARBURETTOR AIR CORRECTOR JET (now 77501) | £4.15 |
| 78 | 61455.139 | WEBER DCD, DCS, DCHE, DCHD, DRT, DCLD, DCB, DCZ CARBURETTOR EMULSION TUBE | RECONDITIONED | £34.95 |
| 79 | 64330.001 | Choke valve | not available |
| 80 | 47600.051 | Choke valve spring | not available |
| 81 | 52030.001 | Ritegno e guidamolla | not available |
| 82 | 34896.002 | Venturi | not available |
| 83 | 31866.005 | Mixture auxiliary venturi | not available |
| 84 | — | Carburettor body — not supplied separately | not available |
Hello,
This is a downloadable PDF sheet, relating to the carburettor shown in the title of this product page.
You will receive the link to download the PDF sheet, as soon as you have completed your order.
You will NOT receive anything through the post – THIS IS NOT A PHYSICAL PRODUCT.
You will need a printer, or a storage facility on your computer/mobile device/tablet, to view and store this PDF file.
We need your postal address during order checkout, because this process involves a financial transaction between you and classic carbs UK.
But we will not be posting any physical parts to you (unless you have included additional, physical parts in your order).
The diagram is mostly in English, but some variations might be in Italian or French.
The PDF will typically show you an exploded drawing of your carburettor, name of each individual part, part number of each individual part, and the original jetting and choke venturi calibration.
The download will be instantly available to you, and you can use it to help you rebuild, restore, repair and calibrate your weber carburettor(s).
This is NOT a generic ‘How to repair your weber’ manual, it is a specific spec-sheet diagram, showing you what you have and what parts it is made of.
This is Genuine WEBER factory publication, with Precise technical details, that can be very useful towards successfully bringing your weber carburettor back to life!
Add it to cart, proceed to checkout, add your contact details (incl. address), and select Paypal, debit or credit card, or bank transfer to pay for your order.
If you need any assistance, email us at [email protected]
Thanks,
Emmanuel
Classic Carbs UK
__________________________________________________________________________________________________________________
After purchase, you will be redirected to this page pictured below, where you can download the product.














