Description
Parts on this drawing
Carburettor parts list in below table — click on available parts to view them or order them in the shop.
Service kit for this carburettor: TRIPLE WEBER 36 DCZ / 36 DCLD CARBURETTOR Service Kit — £239 — listed for the 3 series
Original factory settings for this carburettor
Taken from the calibration table on the drawing. The calibration below is what this carburettor left the factory with. Sizes are in millimetres. Check what is actually fitted to yours before ordering.
Tap the table to open it full size.
| Item | Weber no. | Part | Price |
|---|---|---|---|
| 1 | TS 894 | Air intake (filter adaptor) | not available |
| 2 | 665 | Carburettor cover screw | not available |
| 3 | 1654 | Serrated washer for cover screw | not available |
| 3A | 1654 | Serrated washer for air intake screw | not available |
| 4 | 236 | Filter body gasket | not available |
| 5 | 2494 | Filter gauze | not available |
| 6 | 235 | Filter body gasket | not available |
| 7 | 2612 | Filter union plug | not available |
| 8 | 1910 | Fuel pipe union | not available |
| 9 | 1940 | Double-cone ring for fuel pipe | not available |
| 10 | F 64 | Filter body | not available |
| 11 | 2436 | Carburettor cover gasket | not available |
| 12 | 1975 | Needle valve gasket | not available |
| 13 | 2879 | Pump piston control rod | not available |
| 14 | 2903 | Pump piston spring retaining plate | not available |
| 15 | 1660a | Needle valve (calibrated part, size varies) | not available |
| 16 | 2880 | Pump piston spring | not available |
| 17 | 1381a | Starting device adjuster (calibrated part, size varies) | not available |
| 18 | 2970a | Float | not available |
| 19 | 1829 | Float pivot pin | not available |
| 20 | 2948a | Inlet valve with discharge hole (calibrated part, size varies) | not available |
| 21 | 2877a | Pump piston | not available |
| 22 | TS 865 | Idle jet (calibrated part, size varies) | not available |
| 23 | TS 864 | Idle jet holder | not available |
| 24 | 2850 | Pump control free lever | not available |
| 25 | 2853 | Special nut for secondary spindle | not available |
| 26 | 2853 | Special nut for primary spindle | not available |
| 27 | 2848 | Second pump stroke lever | not available |
| 28 | 2545 | Main jet holder | not available |
| 29 | 2546 | Main jet holder gasket | not available |
| 30 | TS 510 | Primary main jet (calibrated part, size varies) | not available |
| 30A | TS 510 | Secondary main jet (calibrated part, size varies) | not available |
| 31 | TS 625 | Progression hole inspection screw | not available |
| 32 | 2920 | Spindle spacer bush | not available |
| 33 | 2847 | First pump stroke lever | not available |
| 34 | — | Carburettor body (not supplied as a spare) | not available |
| 35 | 2911 | Primary spindle return spring | not available |
| 36 | 767 | Throttle valve screw | not available |
| 37 | 915 | Primary throttle valve | not available |
| 38 | 2987 | Secondary throttle valve | not available |
| 39 | 2919a | Primary spindle | not available |
| 40 | 3008a | Secondary spindle | not available |
| 41 | 514 | Nut retaining split pin | not available |
| 42 | TS 548 | Throttle adjusting screw | not available |
| 43 | 38 | Throttle adjusting screw spring | not available |
| 43A | 38 | Idle adjusting screw spring | not available |
| 44 | 864 | EARLY WEBER DCF / DCO3 CARBURETTOR IDLE MIXTURE SCREW | £36.00 |
| 45 | 2871 | Primary toothed sector | not available |
| 46 | 2932 | Primary toothed sector return spring | not available |
| 47 | 2981 | Release cam | not available |
| 48 | 2939 | Spindle spacer bush | not available |
| 49 | 865 | Lever fixing nut | not available |
| 50 | 2464 | Lock washer | not available |
| 51 | TS 1136a | Throttle valve control lever | not available |
| 52 | 4044 | Toothed sector housing cover | not available |
| 53 | 3049a | Cover with cable sheath support, complete (includes items 54-56) | not available |
| 54 | 2967 | Choke cable sheath support cover | not available |
| 55 | 1584 | Sheath retaining plate screw | not available |
| 56 | 1583 | Sheath retaining plate | not available |
| 57 | 2288 | Toothed sector housing cover screw | not available |
| 58 | 336 | Sheath support cover screw | not available |
| 59 | 3036 | Cam plunger | not available |
| 60 | 3039 | Plunger spring | not available |
| 61 | 3038 | Plunger adjusting screw locknut | not available |
| 62 | 3040 | Plunger spring adjusting screw | not available |
| 63 | 3050a | Starting valve control lever, complete (includes items 64-67) | not available |
| 64 | 364 | Cable clamp screw nut | not available |
| 65 | 2968 | Starting valve control lever | not available |
| 66 | 375 | Cable clamp screw bush | not available |
| 67 | 1698 | Cable clamp screw | not available |
| 68 | 2969 | Starting valve lever pin | not available |
| 69 | 1586 | Spring clip for pin | not available |
| 70 | 939 | Starting valve spring | not available |
| 71 | 936 | Starting valve | not available |
| 72 | G 70 | Venturi (choke) fixing screw | not available |
| 72A | G 70 | Auxiliary venturi fixing screw | not available |
| 73 | 1338 | Starter jet (calibrated part, size varies) | not available |
| 74 | 1339 | Starter jet gasket | not available |
| 75 | 512 | Starter air jet (calibrated part, size varies) | not available |
| 76 | 1520 | Pump jet gasket | not available |
| 77 | TS 635 | Pump jet (calibrated part, size varies) | not available |
| 78 | TS 534a | Primary emulsion tube (calibrated part, size varies) | not available |
| 78A | TS 534a | Secondary emulsion tube (calibrated part, size varies) | not available |
| 79 | 1311 | Primary air corrector jet (calibrated part, size varies) | not available |
| 79A | 1311 | Secondary air corrector jet (calibrated part, size varies) | not available |
| 80 | TS 991a | Pump delivery valve | not available |
| 81 | TS 502 | Primary venturi (choke) (calibrated part, size varies) | not available |
| 81A | TS 502 | Secondary venturi (choke) (calibrated part, size varies) | not available |
| 82 | TS 257 | Primary auxiliary venturi (calibrated part, size varies) | not available |
| 82A | TS 257 | Secondary auxiliary venturi (calibrated part, size varies) | not available |
| 83 | 3025a | Carburettor cover (top) | not available |
| 84 | A 1576 | Air intake gasket | not available |
| 85 | 800 | Air intake fixing screw | not available |
Hello,
This is a downloadable PDF sheet, relating to the carburettor shown in the title of this product page.
You will receive the link to download the PDF sheet, as soon as you have completed your order.
You will NOT receive anything through the post – THIS IS NOT A PHYSICAL PRODUCT.
You will need a printer, or a storage facility on your computer/mobile device/tablet, to view and store this PDF file.
We need your postal address during order checkout, because this process involves a financial transaction between you and classic carbs UK.
But we will not be posting any physical parts to you (unless you have included additional, physical parts in your order).
The diagram is mostly in English, but some variations might be in Italian or French.
The PDF will typically show you an exploded drawing of your carburettor, name of each individual part, part number of each individual part, and the original jetting and choke venturi calibration.
The download will be instantly available to you, and you can use it to help you rebuild, restore, repair and calibrate your weber carburettor(s).
This is NOT a generic ‘How to repair your weber’ manual, it is a specific spec-sheet diagram, showing you what you have and what parts it is made of.
This is Genuine WEBER factory publication, with Precise technical details, that can be very useful towards successfully bringing your weber carburettor back to life!
Add it to cart, proceed to checkout, add your contact details (incl. address), and select Paypal, debit or credit card, or bank transfer to pay for your order.
If you need any assistance, email us at [email protected]
Thanks,
Emmanuel
Classic Carbs UK
__________________________________________________________________________________________________________________
After purchase, you will be redirected to this page pictured below, where you can download the product.










