Description
Parts on this drawing
Carburettor parts list in below table — click on available parts to view them or order them in the shop.
Service kit for this carburettor: WEBER 40 DCZ & DCL CARBURETTOR Service Kit — £53.53
Original factory settings for this carburettor
Taken from the calibration table on the drawing. The calibration below is what this carburettor left the factory with. Sizes are in millimetres. Check what is actually fitted to yours before ordering.
Tap the table to open it full size.
| Item | Weber no. | Part | Price |
|---|---|---|---|
| 1 | 41530.004 | WEBER CARBURETTOR INNER BANJO / FUEL UNION FIBRE SEAL WASHER | £1.51 |
| 2 | 10602.001 | Filter union | not available |
| 3 | 10354.005 | Filter body | not available |
| 4 | 41530.031 | WEBER CARBURETTOR FUEL UNION SEAL / WASHER (INNER) | £1.45 |
| 5 | 12715.019 | Gauze holder plug | not available |
| 6 | 37020.001 | Filter gauze | not available |
| 7 | 34750.001 | Filter body nut | not available |
| 8 | 41530.001 | WEBER IDA, IDA3C & DCO3 CARBURETTOR FUEL UNION WASHER | £1.14 |
| 9 | 41705.011 | Carburettor cover gasket | not available |
| 10 | 41535.015 | WEBER CARBURETTOR NEEDLE VALVE WASHER (now 83102.070) | £1.02 |
| 11 | 10400.008 | Pump piston control rod | not available |
| 12 | 64235.001 | Needle valve, complete (calibrated part, size varies) | not available |
| 13 | 52140.001 | Piston spring retaining plate | not available |
| 14 | 47600.046 | Pump piston spring | not available |
| 15 | 55102.101 | Starting adjuster, complete (calibrated part, size varies) | not available |
| 16 | 41030.003 | Float, complete | not available |
| 17 | 52000.001 | WEBER CARBURETTOR FLOAT FULCRUM PIN | £2.04 |
| 18 | 64290.001 | Pump inlet valve (calibrated part, size varies) | not available |
| 19 | 58602.004 | Pump piston, complete | not available |
| 20 | 41160.001 | WEBER CARBURETTOR IDLE JET (now 74401) | £4.96 |
| 21 | 52570.003 | WEBER DLEA / DRT / DCZ / DMA CARBURETTOR IDLE JET HOLDER | £9.86 |
| 22 | 41540.001 | WEBER IDA3C / DCD / DCZ / IF3C / ICF CARBURETTOR MAIN JET HOLDER WASHER | £1.14 |
| 23 | 41120.001 | WEBER CARBURETTOR MAIN JET (now 73801) | £2.69 |
| 24 | 52590.001 | WEBER CARBURETTOR MAIN JET HOLDER | £12.58 |
| 25 | 64840.003 | WEBER CARBURETTOR AUXILIARY VENTURI LOCKING SCREW | £7.44 |
| 26 | 61015.001 | Weber IDA, DCD, DCN, DCNL, DCO3, DCZ Carburettor Progression hole cover screw | £6.26 |
| 27 | 64590.003 | Idle speed adjusting screw | not available |
| 28 | — | Carburettor body (not supplied as a spare) | not available |
| 29 | 12750.251 | Left spindle shim bush | not available |
| 30 | 58440.001 | Taper pin for bush | not available |
| 31 | 47610.003 | WEBER carburettor Choke Lever Return Spring | £4.17 |
| 32 | 10015.414 | Left main throttle spindle, complete | not available |
| 33 | 64005.057 | Throttle valve | not available |
| 34 | 64570.008 | Grub Screw – Idle jet holder for weber ICH | £1.66 |
| 35 | 10015.421 | Right main throttle spindle, complete | not available |
| 36 | 47610.029 | Right spindle return spring | not available |
| 37 | 55520.001 | Double-tab lock washer for spindles | not available |
| 38 | 34715.014 | WEBER CARBURETTOR SPINDLE / THROTTLE SHAFT NUT | M8x1.0mm | £1.04 |
| 39 | 45082.010 | Pump control lever, complete | not available |
| 40 | 12750.040 | Right spindle spacer bush | not available |
| 41 | 58202.006 | Adjustable toothed sector | not available |
| 42 | 12800.076 | Toothed sector adjusting bush | not available |
| 43 | 47600.007 | WEBER CARBURETTOR IDLE MIXTURE & THROTTLE STOP SCREW SPRING | £1.51 |
| 43A | 47600.007 | WEBER CARBURETTOR IDLE MIXTURE & THROTTLE STOP SCREW SPRING | £1.51 |
| 44 | 12785.005 | Idle speed adjusting screw spacer | not available |
| 45 | 64750.001 | WEBER CARBURETTOR IDLE MIXTURE SCREW (Short Type) | £8.12 |
| 46 | 45062.001 | Starting valve control lever, comprising items 47-50 | not available |
| 47 | 34705.002 | Nut M4 | £0.97 |
| 48 | 10405.003 | Starting valve control lever | not available |
| 49 | 12775.009 | Bush for cable fixing screw | not available |
| 50 | 64800.004 | Starting control cable fixing screw | not available |
| 51 | 32464.009 | Toothed sector housing cover | not available |
| 52 | 45027.015 | Throttle control lever | not available |
| 53 | 47732.001 | Toothed sector clamp | not available |
| 54 | 64570.004 | Toothed sector housing cover fixing screw | not available |
| 55 | 64605.001 | Clamp screw | not available |
| 56 | 64570.002 | Starting valve cover fixing screw | not available |
| 57 | 32610.002 | Split pin for starting valve pin | not available |
| 58 | 52010.010 | Starting valve lever pin | not available |
| 59 | 32534.007 | Starting valve cover | not available |
| 60 | 47600.015 | Starting valve spring | not available |
| 61 | 64370.001 | Starting valve | not available |
| 62 | 64700.005 | Carburettor cover fixing screw (now 64695.005) | £3.74 |
| 63 | 61455.005 | WEBER DCD, DCS, DCHE, DCHD, DRT, DCLD, DCB, DCZ CARBURETTOR EMULSION TUBE | RECONDITIONED | £34.95 |
| 65 | 41370.002 | WEBER CARBURETTOR AIR CORRECTOR JET (now 77501) | £4.15 |
| 66 | 41200.001 | Pump jet (calibrated part, size varies) | not available |
| 67 | 64290.003 | WEBER CARBURETTOR PUMP JET DEMAND VALVE (now 64290.005) | £18.23 |
| 68 | 41530.012 | WEBER CARBURETTOR PUMP JET COPPER WASHER (now 41540.014) | £1.60 |
| 69 | 41360.002 | WEBER CARBURETTOR AIR CORRECTOR JET (now 77201) | £3.04 |
| 70 | 41535.012 | Starting jet gasket | not available |
| 71 | 41210.001 | Starting jet (calibrated part, size varies) | not available |
| 72 | 34894.001 | Venturi (choke) (calibrated part, size varies) | not available |
| 73 | 31956.001 | Auxiliary venturi (calibrated part, size varies) | not available |
| 74 | 31716.043 | Carburettor cover, complete, comprising items 75-76 | not available |
| 75 | 31714.026 | Carburettor cover | not available |
| 76 | 64955.003 | Air intake fixing stud | not available |
Hello,
This is a downloadable PDF sheet, relating to the carburettor shown in the title of this product page.
You will receive the link to download the PDF sheet, as soon as you have completed your order.
You will NOT receive anything through the post – THIS IS NOT A PHYSICAL PRODUCT.
You will need a printer, or a storage facility on your computer/mobile device/tablet, to view and store this PDF file.
We need your postal address during order checkout, because this process involves a financial transaction between you and classic carbs UK.
But we will not be posting any physical parts to you (unless you have included additional, physical parts in your order).
The diagram is mostly in English, but some variations might be in Italian or French.
The PDF will typically show you an exploded drawing of your carburettor, name of each individual part, part number of each individual part, and the original jetting and choke venturi calibration.
The download will be instantly available to you, and you can use it to help you rebuild, restore, repair and calibrate your weber carburettor(s).
This is NOT a generic ‘How to repair your weber’ manual, it is a specific spec-sheet diagram, showing you what you have and what parts it is made of.
This is Genuine WEBER factory publication, with Precise technical details, that can be very useful towards successfully bringing your weber carburettor back to life!
Add it to cart, proceed to checkout, add your contact details (incl. address), and select Paypal, debit or credit card, or bank transfer to pay for your order.
If you need any assistance, email us at [email protected]
Thanks,
Emmanuel
Classic Carbs UK
__________________________________________________________________________________________________________________
After purchase, you will be redirected to this page pictured below, where you can download the product.














