3m Fuel Hose / Line Kit for 8mm unions

Description

Top-Quality fuel hose/Line kit.

Type 2240 – Made by Cohline in England.

Length: 3x Metres (9.84ft).

(7.5mm inside diameter x 13.5mm outside diameter).

Suitable for 8mm Fuel unions

(We also stock it for 6mm fuel unions).

Kit Includes:

3x metre fuel hose

1x In-Line fuel filter.

1x 8mm ‘T’ piece fuel hose connector.

Fuel line specifications:

Inside FPM/ECO

Aramid brading inside

Outside ECO (abrasion resistant outer rubber layer)

DIN 73379-3E (edition 11/97)

Working pressure 10Bar

Testing pressure 20Bar

Burst pressure 50bar

Minimum permissible bend radius 60mm

Suitable for commercial fuel including:

Petrol/gasoline/unleaded

Ethanol and Bio-diesel consisting of Rapeoilmethylester (RME Fuels) and E10.

Temperature range -40° to 125 °C, short term up to 140 °C

Basically, this is the dogs-bollox Chaps.

Lots of fuel lines can deal with short-term vehicle storage, but when a classic car (or any vehicle) is stationary for several months at a time, the fuel in the lines starts to break up.

The ethanol in the fuel starts to separate,which attacks the hose, and leads to material degradation and eventually splits and cracks.

This will cause the fuel to leak which has a high risk of vehicle fire – and we do not want that!

Type 2240 fuel hose will withstand E100 (Pure Ethanol Fuel) indefinitely.

Which means that it is ideal for classic cars/motorcycles/trucks etc.. which are often parked up in the garage for prolonged period of time.

Note: Due to our connection with WEBER & DELLORTO Carburettors, we’d like to clarify that this fuel line is suitable for all WEBERS (except the WEBER ICH Carburettor which has a 6mm union) and all Dellorto DHLA/DRLA and possibly some Dell’Orto Motorcycle carburettors.

If you are unsure about the size of hose you need, just measure the outside diameter of your fuel union(s) and compare it against the inside diameter of our hose (Shown above, in the hose specifications).

Shipping Worldwide OK